
USER MANUAL
26
5. MAINTENANCE UNDER SPECIAL CONDITIONS
Maintenance under extreme or special conditions needs to be carried out on
a more frequent basis than during standard conditions. Therefore the
operator/owner has the obligation to apply preventative maintenance on a
more frequent basis to suit the site conditions. The following table is
presented as a guide:
Condition
Recommendation
Muddy water, rain,
snow
Before operation
Check all inspection plates are in
good condition
During operation
Lubricate every 2 hours
After operation
Drain the chain compartments of
water and lubricate drive chains
Salt water & Highly
Corrosive Material
Before operation
Check all inspection plates are in
corrosive material in good condition
.
During operation
Lubricate every 2 hours.
After operation
Drain chain compartments of water
and lubricate drive chains
Clean bucket with high-pressure
fresh water to remove material
residue
Excessive dust
During operation
Lubricate every 2 hours.
Rocky material
After each two hours
Check for structural damage, cracks
of operation and loose/missing
bolts. Ensure inspection plates are
in good condition.
Cold weather
After operation
Use high quality high-viscosity
lubricating products.
Clear dirt from bucket to prevent
freezing.
If further details or clarification is required please contact the dealer and/or
manufacturer.
Summary of Contents for REMU
Page 1: ...OPERATORS MANUAL ...
Page 44: ...USER MANUAL 44 ...