Figure 5
Travel/steering lever adjustment
1.
2.
Jam nut
Ball joint
14. Remove the capscrew, linkage rod with hex lock nut and ball joint, flat washer , rebound washer , and hex locknut .
DO NOT remove the rubber isolator from the transmission lever.
Figure 6
Travel/steering lever adjustment (left side shown)
1.
2.
3.
4.
5.
6.
7.
8.
9.
Capscrew
Linkage rod
Hex lock nut
Ball joint
Flat washer
Rebound washer
Hex locknut
Rubber isolater
Lever
15. If the tires turn rearward in Step 10, the ball joint should be rotated counterclockwise (farther off the rod) to make
the rod overall length longer. If the tires turn forward in Step 10, the ball joint should be rotated clockwise (farther
onto the rod) to make the rod overall length shorter.
16. Reassemble the linkage rod with hex locknut and ball joint to the transmission lever with capscrew, flat washer,
rebound washer and hex locknut. DO NOT tighten at this time.
