2001 VOLVO Cross Country
NOTE: Refer to
for hoisting the vehicle on a garage lift.
CAUTION:
●
The car must not be driven with wheels of different dimensions or with a spare tire other than the one
that came with the car. The use of different size wheels can seriously damage your car's transmission.
●
Correct tightening torque on wheel bolts must be observed. The wheel bolts should never be greased
or lubricated. The extended, chromed wheel bolts must not be used with steel rims, as they make it
impossible to fit the hub caps.
Installing the wheel
●
Clean the contact surfaces on the wheel and hub.
●
Lift the wheel and place it on the hub. Make sure that you align the wheel with the guide stud on the
wheel hub prior to installation.
●
Install the wheel bolts and tighten hand-tight. Using the lug wrench, tighten crosswise (see illustration
above) until all bolts are snug.
●
Lower the vehicle to the ground and alternately tighten the bolts crosswise to 100 ft. lbs. (136 Nm).
●
Install the wheel cap (where applicable).
http://new.volvocars.com/ownersdocs/2001/2001_XC/01xc_07.htm (11 of 12)8/11/07 11:55 PM