3.7.1 Date/Time
Click "Date/time" to make setup for DATE/TIME
by clicking the "
¡ø
" or "
¨‹
icons.
"
1) Select "Volume" to enter the interference of volume
setup. There click "+" to increase volume and "-" to
decrease volume. During the setup of volume, the volume
scale bar will display.
2) Click " "for mute function & then it will become" ".
3.7.2
Calibrate
3.7.3
Volume
3.7.4
System
After the system begin to calibrate touch panel, a
symbol of "+" will be found in the centre of the panel.
Just click it & then "+" will appear on each corner of
the panel. Click the "+" till it disappears. Finally, the
system will exit automatically.
Click "system" to check the capacity of USB m ess age .
Calibrate the touch panel.
Please refer to "3.7.2".
Not ignited yet
Ignite the car at first.
No power
Recharge the battery
Chapter Four Guide of Trouble Shooting
Chapter Four Guide of Trouble Shooting
Guides of trouble shooting
Guides of trouble shooting
Attentions:
Attentions:
of troubles
Reasons
How to solve
The follows are guides of trouble shooting, which
can help you solve some familiar troubles. Once it can
not be solved, please contact the authorized repair station
for repairs. Please never take part the system by yourself,
otherwise, it may cause serious bad results.
Description
Battery of car
has been run
out of
No voice
Heard.
Set too low
volume to be
Set a bigger volume.
Please refer to "3.7.3"
for details.
panel control
Bad touch
touch panel yet
Not calibrated
Click "setup" icon in the interference of main menu
to get into the submenu. There, please click "c ali bra te"
and then "Start" to calibrate touch panel control.
3.7.5 TFT Setup
1. Backlight: two selects for brightness:"High" or
"Low". Select "High" for brightest display or "Low"
for a dark display.
2. Auto Sensor:Select "On" to let the display change
its brightness according to the environment automatically.
And "off" to turn off the auto sensor function.Please note:
While auto sensor works, the brightness can not be setup
manually.
