1989 Volvo 740
Replacing sealed beam headlamp units
1. Squeeze the clip and pull it upwards.
2. Lift the rim slightly and remove it forwards.
3. Remove Phillips screws and rim. Lift out the headlamp unit.
4. Disconnect the socket contact.
Installation is done by reversing the procedure.
Check headlight alignment.
pg. 74 Replacing bulbs
Replacing bulbs, front
Access to the bulbs is obtained from the engine compartment.
1 Switch off the lights and starting (ignition) key.
2 Do not remove the connector from the bulb holder. Turn the bulb holder slightly counterclockwise and
withdraw the bulb holder and bulb.
3 Remove the bulb from the holder by pressing in and turning slightly counterclockwise.
4 Insert a new bulb and install the bulb holder.
NOTE:
One of the tabs on the bulb holder is slightly wider than the other two.
file:///K|/ownersdocs/1989/1989_740/89740_05.htm (5 of 18)12/30/2006 8:23:35 AM
Classic Cars & Cycles www.ClassicCycles.org