58
IMG-287147
Position the control module on the floor so that it fits in the cut-
out in the insulation.
Secure the control module to the floor.
Connect the routed cable connector to the control module.
59A
IMG-287143
59B
IMG-287144
Illustration A
Take the adapter cable
B
with the green connector from the kit.
Connect the green 16 pin connector to the control module.
Connect the green prerouted 5-pin male connector to the
corresponding connector in the adapter cable.
Secure the excess cable at the existing using a cable tie.
Image B applies to cars with Trailer Module (TRM):
The image shows the location of the control module for the
Parking Assistance Camera (PAC) together with the Trailer
Module (TRM).
Ensure that the control module for the parking assistance
camera is positioned so that it and the wiring do not rub against
the Trailer Module (TRM).
Disconnect the green 5-pin male connector (1) from the Trailer
Module (TRM) and connect to the green 5-pin female connector
(2) in the adapter cable. Connect the remaining green
connectors (3) in the adapter cable to the parking assistance
camera module and the Trailer Module (TRM).
Installation instructions, accessories
Volvo Car Corporation Gothenburg, Sweden
© Volvo Car Corporation
Parking assistance, camera, rear. For Sensus Connect- 31428626 - V1.1
Page 32 / 56