8
IMG-282411
Take the small torx screws and carefully tighten the connector to
the holder. Ensure that the connector's circuit board is properly
against the screw turret and that there is no play.
Remove the butyl tape from the screws.
9
IMG-246024
Preparations
Turn the ignition switch to position 0.
Disconnect the battery negative lead.
Note!
Wait at least three minutes before unplugging the connectors
or removing other electrical equipment.
Installation instructions, accessories
Volvo Car Corporation Gothenburg, Sweden
© Volvo Car Corporation
Navigation system, portable- 30756311 - V1.4
Page 8 / 71
