6A
IMG-282406
6B
IMG-282409
Illustration A
Install the spacer in the bottom of the holder.
Illustration B
Ensure that the holder's two screw turrets align between the
small pins in the oblong holes in the spacer. A click should be
heard when the spacer is securely in position.
7
IMG-282410
Place the connector in the bottom of the hole. The guide hole (1)
in the connector's circuit board must align in the corresponding
pin at the bottom of the holder and the holes (2) in the circuit
board must be over the holder's screw turret.
Installation instructions, accessories
Volvo Car Corporation Gothenburg, Sweden
© Volvo Car Corporation
Navigation system, portable- 30756306 - V1.5
Page 8 / 24
