31
IMG-280703
Select a Ø25 mm (1/2") hole saw.
Change the centre drill in the hole saw back to the original drill
bit.
Drill for the connection of the connector. Drill through all layers of
the dashboard. Use a 25 mm (1")drill stop.
32
IMG-277332
Use a small screwdriver and clear the three small holes from
any chips so that the underlying plastic layer appears.
Remove the paper from the air ducts and the paper from under
the dashboard. Make sure no chips are left inside the
dashboard.
Installation instructions, accessories
Volvo Car Corporation Gothenburg, Sweden
© Volvo Car Corporation
Navigation system, portable- 30756303 - V1.5
Page 20 / 67
