18
IMG-280927
Tighten the L profile's four M10 screws (1) alternatingly so that
the L profile and the inner member of the bumper lie against
each other correctly. Tightening torque: 47 Nm (35 lbf.ft).
Tighten the four M10 screws (2) of the towbar retainer and
reinforcement stay alternatingly. Tightening torque: 47 Nm (35
lbf.ft).
Tighten the two M14 screws (3). Tightening torque: 200 Nm (147
lbf.ft).
Tighten the six screws (4) for the reinforcement stay's front
attachments in steps. Tightening torque 20 Nm (15 lbf.ft.) and
then angle-tighten 90°. There is not a lot of room to torque-
tighten the middle screw, use special tool part no. 9997361with a
3/8" socket extension.
Installation instructions, accessories
Volvo Car Corporation Gothenburg, Sweden
© Volvo Car Corporation
Towbar, detachable- 31269628 - V1.7
ページ 14 / 27