Volvo 2016 XC 90 Twin Engine, Owner'S Manual

Page: 325 / 582

DRIVER SUPPORT
}}
* Option/accessory, for more information, see Introduction. 323
Maintenance
The BLIS/CTA
5
sensors are located on the
inside of the rear fenders/bumper.
Keep the highlighted area clean (on both sides of the
vehicle)
For the system to function optimally, the area
over and around the sensors must be kept clean.
If one or both of the sensors are blocked and
"
Rear sensors blocked, cleaning needed
" is
displayed in the instrument panel, clean the area
over and around the sensors as soon as possible.
A text message can be erased by briefly pressing
the
O
button on the right-side steering wheel
keypad.
CAUTION
Repairs to the BLIS/CTA systems and/or
repainting the rear bumper should only be
done by a trained and qualified Volvo service
technician.
Related information
•
Blind Spot Information (BLIS)
*
On/Off
(p. 322)
•
Blind Spot Information (BLIS)
*
(p. 320)
•
Cross Traffic Alert (CTA)
*
(p. 323)
Cross Traffic Alert (CTA)
*
Cross Traffic Alert (CTA) is a supplementary part
of Blind Spot Information and is intended to
detect vehicles crossing behind your vehicle
while you are backing up.
When does Cross Traffic Alert function
Principle for CTA
CTA supplements BLIS by warning the driver of
crossing traffic behind your vehicle, for example,
when backing out of a parking space.
It is primarily designed to detect another vehicle
but in certain cases may also detect pedestrians
or smaller objects such as bicycles.
CTA is only activated when the vehicle is rolling
rearward or backing up and is activated automati-
cally when the gear selector is put in reverse.
5 Cross Traffic Alert
*