07 Driver support
07
203
5 seconds after the gear selector has been
moved from
R
or until the vehicle's forward
speed exceeds 6 mph/10 km/h
(21 mph/35 km/h in reverse). The screen will
then revert to the view that was displayed
before
R
was selected.
If any button on the center console control
panel is pressed, the camera image will
disappear from the display. Pressing
CAM
will return the camera image to the display.
Settings
By default, PAC is set to activate when the
gear selector is moved to
R
To change PAC settings when a camera view
is displayed:
1. Press
OK/MENU
when a camera view is
on the screen. A menu will be displayed.
2. Turn
TUNE
to scroll to the desired set-
ting.
3. Press
OK/MENU
to make the setting and
exit the menu by pressing
EXIT
.
Summary
•
Pressing
CAM
will activate the camera
even if the gear selector is not in Reverse.
Related information
•
Park assist – introduction (p. 198)
•
Park assist – function (p. 198)
•
Park assist – troubleshooting (p. 201)
•
Park assist – limitations (p. 200)
•
Rear Park Assist Camera (PAC) – intro-
Rear Park Assist Camera (PAC) –
guiding and marker lines
Guiding lines
The lines on the screen are projected as if
they were a path on the ground behind the
vehicle and are directly affected by the way in
which the steering wheel is turned. This ena-
bles the driver to see path the vehicle will
take, even if he/she turns the steering wheel
while backing up.
When backing up with a trailer, the guiding
lines show the path that the
vehicle
will
take, not the trailer.
WARNING
Keep in mind that the image on the screen
only shows the area behind the vehicle.
The driver must always watch for people,
animals, other vehicles, etc., near the sides
of the vehicle when turning while backing
up.
Related information
•
Rear Park Assist Camera (PAC) – opera-
•
Summary of Contents for 2016 s60 inscription
