Volvo 2009 C30, Owner'S Manual

Page: 55 / 274

02 Instruments and controls
Indicator and warning symbols
02
``
55
Function check
The indicator and warning symbols
1
light up
when you turn the ignition key or the optional
keyless drive start control to the driving posi-
tion (position
II ) before starting. This shows that
the symbols are functioning.
When the engine starts, all sym-
bols go out. If the engine is not
started within 5 seconds, all of the
symbols except the malfunction
indicator light (
CHECK ENGINE )
and the oil pressure warning light
will go out. Certain symbols may
not have their functions illustrated, depending
on the car's equipment.
CHECK
ENGINE
The PARK BRAKE symbol will not go out until
the parking brake has been released.
Symbols in the center of the instrument
panel
G026365
Warning symbol
The red warning symbol lights up
to indicate a fault that could affect
the car's drivability.This symbol
illuminates when the vehicle is
traveling at speeds above 5 mph
(7 km/h). A text explaining the nature of the fault
will also be shown in the information display.
The symbol and accompanying text will remain
on until the fault has been corrected. This sym-
bol may also light up in combination with other
indicator or warning symbols.
If the red warning symbol lights up:
1. Stop the car as soon as possible in a suit-
able location.
2. Read the message in the information dis-
play.
3. Follow the instructions provided, or con-
tact a trained and qualified Volvo service
technician. Erase the message by pressing
READ , see page 60.
Information symbol
The yellow information symbol
lights up to alert the driver to a
message in the information dis-
play. This symbol illuminates when
the vehicle is traveling at speeds
below 5 mph (7 km/h).
The message can be erased by pressing the
READ button, see page 60, or will disappear
automatically (the length of time required for
the message to disappear varies, depending
on the function indicated).
When the message " TIME FOR REGULAR
SERVICE " is displayed, the text can be erased
and the information symbol light can be turned
off by pressing the
READ button. The text will
disappear and the symbol light will go out auto-
matically after two minutes.
1
On certain engines, the symbol for low oilpressure is not used. Instead, a text warningis provided in the information display, see page 206.