Temporarily switching off Spin control
1. Turn the thumbwheel
until the
DSTC
menu is shown.
2. Hold down the
RESET
button
to toggle between
DSTC SPIN CONTROL ON or OFF
.
Messages in the information display
DSTC Temporarily OFF
- system function has been temporarily reduced due to high brake disc temperature. The
function is activated automatically when the brakes have cooled.
DSTC Service required
- the system has been disabled due to a fault. If this occurs:
152
04 Comfort and driving pleasure
Stability system
1. Stop the vehicle in a safe place and turn off the engine.
2. Restart the engine.
If the message remains when the engine is restarted, drive to an authorized Volvo workshop to have the system
inspected.
Symbols in the instrument panel
If the symbols
and
are displayed at the same time, read the message in the information display.
If the symbol
appears alone, it may appear as follows:
If the symbol flashes, this indicates that the stability system is actively functioning to help counteract wheel spin
and/or a skid.
If the symbol remains on for approximately 2 seconds after the engine has been started, this indicates that the system
is performing a self-diagnostic test.
WARNING
The stability system is intended to help improve driving safety. It supplements, but can never replace, the driver's
judgment and responsibility when operating the vehicle. Speed and driving style should always be adapted to traffic
and road conditions.
153
04 Comfort and driving pleasure
Summary of Contents for 2008 S80
