6.
EXIT
-press to cancel a menu selection or a selected function
7.
AUTO
-search for and store the strongest radio stations in the area in which you are driving
Searching for stations
There are two ways to manually tune a radio station:
1. Turn the
TUNING
dial (3) to the desired frequency.
2. Press the left or right arrow key on the
MENU NAVIGATION CONTROL
and hold it down. The radio scans
slowly in the selected direction and will increase the scanning speed after a few seconds. Release the button when the
desired frequency appears in the display.
The frequency can be fine-tuned by short presses on the left/right arrow keys.
Storing preset stations
Manually storing a station
1. Tune to the desired station.
2. Press and hold the preset button under which the station is to be stored. The audio system sound will be interrupted
for a few seconds and
STATION STORED
will appear in the display.
NOTE
A total of 30 stations can be stored; 10 stations each in
AM
,
FM1
and
FM2
.
Automatically storing a station
Pressing
AUTO
(7) automatically searches for and stores up to ten strong AM or FM stations in a separate memory. If
more than ten stations are found, the ten strongest ones are stored. This function is especially useful in areas in which
you are not familiar with radio stations or their frequencies.
To use the AUTO function:
1. Select a waveband using the
AM/FM
button (1).
2. Start the search by pressing
AUTO
until
AUTO STORING
appears in the display.
When the search is completed,
AUTO STORING
will no longer be displayed. If there are no stations with sufficient
signal strength,
NO AST FOUND
is displayed.
The auto-stored stations can be selected using the preset buttons (2).
Press
EXIT
(6) to terminate the automatic storing function.
When the radio is in auto-store mode,
AUTO
is shown in the display.
AUTO
disappears when you return to normal
radio mode, which can be done by briefly pressing
AM/FM
(1),
EXIT
(6), or
AUTO
(7).
214
10 Audio
Radio functions
To return to the Auto-store mode, press the
AUTO
button briefly and select a stored station by pressing one of the
preset buttons (2).
Summary of Contents for 2007 S40
Page 39: ...Contents Top of Page...
Page 138: ...Contents Top of Page...
Page 182: ...207 09 Maintenance and servicing Fuses Contents Top of Page...
