2000 Volvo S & V 40
Contents of tool kit
1. Combined screwdriver/socket wrench
2. Lug wrench
3. Crank (for the jack)
4. Gloves
The screwdriver is combined with the socket wrench. The tools can be alternated by pulling the shaft out
of the handle and reinserting the opposite end of the shaft into the handle.
Removing the jack
Take the spare wheel out.
Tighten the jack slightly by turning the axle (1) and remove it from the retaining clip.
Replacing the jack
Put the jack in the clip and turn axle (1) until the jack is securely in place.
Replace the tools in the same place.
CAUTION:
· The car must not be driven with wheels of different dimensions or with a spare tire other than the one
that came with the car. The use of different size wheels can seriously damage your car's transmission.
· Correct tightening torque on wheel bolts must be observed. The wheel bolts should never be greased or
lubricated. Extended, chromed wheel bolts must not be used with steel rims, as they make it impossible
to fit the hub caps.
file:///K|/ownersdocs/2000/2000_SV40/00sv40_06a.htm (2 of 11)12/30/2006 3:42:41 PM