14
Volvo Penta IPS Autopilot System
Ysplit cable
Connect the Ysplit cable to the Volvo Penta Gateway. Use the connection that
DOES NOT have a yellow “MUTILINK” label.
Finally, connect to the Volvo Penta system bus using the “MULTILINK” ends of the
Ysplit cable.
1.13 EMC Conformance
Always check the installation before going to sea to make sure that it is not
affected by radio transmissions, engine starting etc.
1.14 Postinstallation Checks
Before you proceed to the commissioning stage, it is important to verify your
installation. Please follow these simple procedures before commissioning:
D7941-1
MULTILINK
MULTILINK
3
D7942-2
MULTILINK
MULTILINK
MULTILINK
MULTILINK
4
5
87054_3.book Page 14 Tuesday, July 18, 2006 8:49 AM