Volvo Penta TAD1240GE, Operator'S Manual, Page: 16 / 76

14
Presentation
Menus
There are several sub-menus under each main menu.
There is not space for all the menu choices on the
display. To scroll through the menus, use the “7” and
“9” buttons on the display. Press the “SEL” button, no.
“8” to make a selection. Please refer to the illustration
on the previous page.
NOTE! The “Setup” menu can be used to select the
language that you want to use on the display.
Main menu
n
Engine data , relevant engine data.
n
Preheat , manual activation of pre-heating
n
Governor mode , activation of droop.
n
Diagnostics , shows fault codes in plain language.
n
Trip reset , resets trip data
n
Setup , parameter setting
n
Information , shows the data for the applicable
hardware, software, data set and engine identifica-
tion of the engine and DCU
Engine data
shows relevant engine data.
• Engine speed, can be controlled with the “SPEED +”
and “SPEED –” buttons (rpm)
• Charge pressure (kPa)
• Coolant temperature (°C)
• Charge air temperature (°C)
• Oil pressure (kPa)
• Oil temperature (°C)
• Engine hours (h)
• Battery voltage (V)
• Fuel consumption (l/h)
• Instantaneous fuel consumption (trip fuel) (l)