201610-186-ENG
User manual - TURBISOL 164/2
P13
6. MAINTENANCE
6.1. ERROR CODES
The different error codes show up on the display (G).
CODE
DEFINITION
TO DO
No display.
Connect the plug, verify the power supply (230V), verify the fuse on
the electric box.
Emergency stop
pressed.
Unhook the emergency stop button (AU).
Machine is in OFF
mode.
Switch on the machine by pressing on the button (1).
Default control
engine.
Turn the machine to "OFF" for one minute, then start it up again.
If the problem persists or if in doubt about the correct working of the machine, do not try to repair the
machine yourself or to dismantle it.
Contact an authorized After-Sale Service or our hotline on :
+33(0)4 42 29 08 96
.
6.2. SERVICING
After every use :
• let the machine run until all the product has been evacuated of the tank.
• put the machine in "SOUFFLAGE SEUL" mode (button (3)) to evacuate the last remains of
product from the hose.
•
clean the air filter of product propulsion (rectangular filter). The clogging of this filter affects the
machine efficiency.
•
clean the air filter of the turbines cooling (round foam filter). The clogging of this filter can
overheat the turbines and damage it.
In case of an intensive use of the machine, these filters shall be cleaned up more
regularly.
Stop the machine and clean the filters, then restart working.
