background image

202008-481A-ENG 

User manual - ARTI 130-2 + T5 Mini + HV640

P3

1. USER MANUAL 

1.1. IMPORTANCE OF THE MANUAL

This manual is a key part for the use of your machine. It summarizes the procedures of starting-up, cleaning 
and maintenance of the device and also the safety instructions you need to observe.

Read carefully all the working and safety instructions and the warnings included in this manual before 

starting your machine.
Most of the accidents are caused by the non-compliance of the safety standards and rules.

This manual must be kept near the machine, within reach of the user and held in good condition until the 
final destruction of the machine.

In case of loss or deterioration of the manual, you can ask the machine manufacturer mentioned on page 
4 for a copy at any moment.

1.2. RECEIVERS OF THE MANUAL

This manual is intended to any staff which will manipulate the machine :

- people in charge of the transport of the machine
- people in charge of the use of the machine
- people in charge of the cleaning and maintenance of the machine

- people in charge of the final destruction of the machine

Summary of Contents for 40035





















Reviews: