Choosing the right interchangeable tip for your effect.
•
There are only two things to consider while selecting an interchangeable tip for
you affects pedal. One is the actual physical size of the tip (barrel length and
barrel width). Polarity of the tip is the most important factor though while
choosing a tip for you affects pedal.
•
Please read the owners manual of the effect pedal or the enclosed Voltz
compatibility chart to determine proper tip size and polarity.
•
For the actual size of the tip, looks at the effect pedal DC input or the power
supply that came with the effect pedal and find the size of the included
interchangeable tip the matches up the closest. Insert the tip (make sure the tip
is not connected to any power source) and lightly wiggle the tip around to make
sure there is no excessive play in the connection.
•
Determine the polarity of the tip needed by checking your owner’s manual for the
effect pedal, the power supply that came with the effect, the Voltz compatibility
chart or by looking at the label on the DC input of the effects pedal you are trying
to power.
Important Operating Instructions
***Make sure the polarity marked on the milliVoltz tip matches that of you effect pedal***
***Make sure that the voltage marking on the milliVoltz tip matches the voltage
requirement of your effect pedal***
***Only use patch and guitar instrument cables that are grounded to avoid loss of
signal***
***Be sure that the Voltz unit is switched to CHARGE if equipment is not in use to avoid
the battery from being drained***
***When charging in AC or DC mode, make sure that the Voltz unit is switched to the
CHARGE position prior to plugging in***
***To play while charging, first turn switch to CHARGE position and then plug in AC or
DC power source***
***To play using only battery power, just flip the Voltz switch to DISCHARGE and you
will have hours of isolated power at you disposal… make sure you turn the Voltz unit
back to CHARGE after you are finished to avoid draining the battery***
***Make sure you periodically plug and unplug mechanical connections on your pedal
board and turn knobs such as volume and trim pots (monthly). This will keep
connections and knobs clean preventing failure during performance***