Voltmaster DMM 1, Operating Instructions Manual

Page: 15 / 76

15
D
E
U
TS
C
H
D
E
U
TS
C
H
Information
Safety information
WARNING
An electric shock can result in death or serious personal injury and endanger the
function of objects (e.g. damage to the instrument).
WARNING
Never point a laser beam towards eyes directly or indirectly via reflective surfaces.
Laser radiation can cause irreparable damage to the eyes. The laser beam must be
deactivated when conducting measurements close to people.
WARNING
Unauthorised modification and / or changes to the instrument are not permitted, for
reasons of safety and approval (CE). In order to ensure safe and reliable operation
using the instrument, you must always comply with the safety instructions, warnings
and the information contained in the section "Intended use".
WARNING
Comply with the following specifications before using the instrument:
| Avoid operating the instrument near to electric welding equipment, induction
heaters or other electromagnetic fields.
| After abrupt temperature fluctuations, the instrument must be allowed to adjust to
the new ambient temperature for approx. 30 minutes before using it, in order to
stabilise the IR sensor.
| Do not expose the instrument to high temperatures for a long period of time.
| Avoid dusty and humid environments.
| Measuring instruments and their accessories are not toys, and must be kept out
of the reach of children!
|
When working in commercial facilities, comply at all times with the specifications
of the accident prevention regulations for electrical systems and equipment as
established by the employer’s liability insurance association.
Comply with the five safety rules:
1
Disconnect
2
Ensure that the instrument cannot be switched back on again
3
Ensure isolation from the power supply (check that there is no voltage on both poles)
4
Earth and short-circuit
5
Cover adjacent live parts