39 (48)
ENG
Intended use
This product is intended for use in sawing,
cutting, scraping, grinding and cutting
wood, plastic, plaster, non-ferrous metals
and uncured nails and staples. The product
may also be used for dry sanding, scraping
and precision work on small surfaces and
near edges. Use the product only in the
manner and for the uses described here. All
other uses and changes to the product are
outside the limits of the prescribed use and
involve significant risks. The manufacturer is
not liable for damages that occur due to im-
proper use. The product should not be used
professionally.
Package contents
1 Multicutter
1 Delta sanding plate
6 Sandpaper
1 Scraping knife
1 Saw blade for wood and plaster board
1 Diamond saw blade
1 Dust extraction system
Battery and charger are purchased
separately
Technical data
Multi tool
Rated voltage:
20V
Rated speed:
n
0
5000-19000/min
Oscillation angle: 3,2°
Weight with 2Ah
battery:
1,3kg
Recommended battery, Voltgear 6500500
Rated voltage:
20V
Capacity: 2,0Ah
Recommended charger, Voltgear 6500510
Input
Rated voltage:
230-240V ~50Hz
Power: 65W
Fuse:
3,15A
Output
Rated voltage:
21,5V
Rated current:
2,4A
Charging time:
60min (2Ah battery)
Safety class:
II/
Noise emmission value:
Sound pressure level: L
PA
= 75 dB (A)
Uncertainty sound K
PA
= 3 dB (A)
Sound power level: L
WA
= 86 dB (A)
Uncertainty sound: K
WA
= 3 dB (A)
Vibration emmission value:
Handle:
a
h
: 4,9 m/s
2
Uncertainty vibration: K= 1,5 m/s
2
The vibration emission values and the noise
emission values specified in these instruc-
tions have been measured in accordance
with a standardised test procedure EN
62841-2-4 and can be used for comparing
the power tool with another power tools.
The specified total vibration values and the
noise emission values can also be used to
make a provisional estimate of the load.
NOTE
NOTE
Depending on the manner in which the
power tool is being used, and in particular
the kind of workpiece being worked, the
vibration and noise emission values can
deviate from the values specified in these
instructions during actual use of the power
tool.Try to keep the vibration load as low as
possible. Measures to reduce the vibration
load are, e.g. wearing gloves and limiting
the working time. Wherein all states of op-
eration must be included (e.g. times when
the power tool is switched off and times
where the power tool is switched on but
running without load).
WARNING!
Use ear protection!
Summary of Contents for 7330027147901
Page 48: ......
