S
OFTWARE
Page 68
© Voltech 2010
Power Analyzer User Manual
6.2.
IEC
62301
L
OW
P
OWER
S
TANDBY
S
OFTWARE
Aim
The aim of this software is to enable the user to easily use the to verify their
product against the low power standby standard IEC 62031.
Where to find it
The software can be found on Voltech‟s web site at www.voltech.com in the software
and firmware section.
Installation
Double click on the file “IEC62301SoftwareSetup.exe” and follow the on screen
instructions. During the installation you will be prompted to install the National
Instruments NI-VISA runtime. Please install this. If a later version exists on your PC,
then these files will not be over-written.
Further Information
To run the software click on Start -> Program Files -> Voltech Software -> IEC 62301
Software or click on the “IEC 62301 Software” icon on the desktop. When the software
runs, you will be asked whether you want to run a setup wizard. If you click no, then
you can get to the main application where you can open the help (F1) that contains
details on all the features of the software.
6.3.
G
ENERAL
P
URPOSE
M
EASUREMENT
S
OFTWARE
Aim
The aim of this software is to provide general data gathering of results from a
to a PC using GPIB, RS232 or USB as a connection method.
The software allows you to view result as values or graphically.
Where to find it
The software can be found on Voltech‟s web site at www.voltech.com in the software
and firmware section.
