R
EMOTE
O
PERATION
Power Analyzer User Manual
© Voltech 2010
Page 53
Display Data Status Enable Register (DSE)
Read by “:DSE?” and set by “:DSE <value>”.
IEC_Flick
IFS
IEC_Flick
Bin
IEC_FLU OVV OVA NDV
DVL
Bit 7
– IEC_FlickIFS
Enable IEC_FlickIFS bit in DSR. (Default to enabled on
power-up.)
Bit 6
– IEC_FlickBin
Enable IEC_FlickBin bit in DSR. (Default to enabled on
power-up.)
Bit 5 - IEC
Enable IEC bit in DSR. (Default to enabled on power-up.)
Bit 4 - OVV
Enable OVV bit in DSR.
Bit 3 - OVA
Enable OVA bit in DSR.
Bit 1 - NDV
Enable NDV bit in DSR. (Default to enabled on power-up.)
Bit 0 - DVL
Enable DVL bit in DSR. (Default to enabled on power-up.)
Standard Event Status Register (ESR)
Read by “*ESR?” or in summary by the ESB bit in STB.
CME
Bit 5 - CME
Command error; command not recognized.
Standard Event Status Enable Register (ESE)
Read by “*ESE?” and set by “*ESE <value>”. Cleared when read.
CME
Bit 5 - CME
Enable CME bit in ESR. (Default to enabled on power-up.)
