• For safety reasons, disconnect the product from the mains socket during storms.
•
Never pour liquids over electrical devices or place objects filled with liquid next to the device.
If liquid or a foreign object enters the interior of the device nevertheless, first power down
the respective mains socket (e.g. switch off the circuit breaker) and then pull the mains plug
from the mains socket. Do not operate the product any more afterwards, but take it to a
specialist workshop.
•
Never use the product immediately after it has been brought from a cold room into a warm
one. The condensation that forms may destroy the product. Furthermore, it can cause a
lethal electric shock! Allow the product to reach room temperature before connecting it and
putting it into use. This may take several hours.
• Make sure the USB ports are not short-circuited.
•
Ensure there is sufficient air circulation when you operate the product. Never cover the
product.
•
Consult a technician if you are not sure how to use or connect the product, or if you have
concerns about safety.
•
Maintenance, modifications and repairs must be carried out by a technician or a specialist
repair centre.
•
If you have any questions which are not answered in these operating instructions, contact our
technical support service or other technical personnel.
b) Connected devices
•
Always observe the safety information and operating instructions of any other devices which
are connected to the product.
•
Always switch off the USB device to be connected before connecting and disconnecting.
Product overview
3
2
1
1
Power plug
2 USB-C
TM
output
USB-C PD
3 USB-A output
TOTAL 2.4 A
MAX.
(2x)
Setup
•
Connect the power plug
(1)
to an appropriate power outlet.
•
Connect a switched-off USB device to one of the USB-A outputs
TOTAL
2.4 A
MAX.
(3)
or the USB-C
TM
output
USB-C PD (2)
. You can charge up to three devices at the same time. Please note the available
charging currents, see section "Technical data".
•
The USB device will start to charge. Should you wish to operate the USB device, you may turn it on now.
Switch off the USB device before you unplug it from the product.
• You can use the USB-C
TM
output
USB-C PD
to charge devices with different voltages (5 V, 9 V, 12 V) and
with USB Power Delivery (PD 18 W).
• Disconnect all connected USB devices from the USB charger after use. Disconnect the USB charger from
the mains socket after use.
Care and cleaning
• Disconnect the product from the mains socket and connected devices before cleaning.
• Never use aggressive detergents, rubbing alcohol or other chemical solutions, as these may damage the
casing or cause the product to malfunction.
•
Do not immerse the product in water or other liquids.
• Use a dry, lint-free cloth to clean the product.
Disposal
Electronic devices are recyclable waste and must not be placed in household waste. At the end
of its service life, dispose of the product according to the relevant statutory regulations.
You thus fulfil your statutory obligations and contribute to environmental protection.
Technical data
Input voltage / current ..................
100 – 240 V/AC, 50 – 60 Hz, max. 0.7 A
Output voltage / current ............... USB-C
TM
: 5.0 V/DC 3.0 A, 9.0 V/DC 2.0 A, 12.0 V/DC 1.5 A; max. 18.0 W
2x USB-A: 5.0 V/DC max. 2.4 A total, max. 12.0 W
Output power
...............................
max. 30.0 W
Average active efficiency
.............
85.8 %
Efficiency at low load (10 %)
.......
87.3 %
No-load power consumption
........
0.14 W
Operating conditions ....................
0 to +35 °C, 10 – 90 % RH
Storage conditions .......................
-10 to +55 °C, 10 – 90 % RH
Dimensions (L x W x H)
...............
100 x 55 x 27 mm
Weight
.........................................
approx. 96.5 g (USB charger without cable)
Commercial Registration Number:
HRB 3896
Manufacturer:
Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau
Operating instructions
VC-30WC-PD USB-C Charger 30 W
Item no. 2176725
Intended use
The product has two USB-A outputs and one USB-C
TM
output. The product is suitable for charging and
operating up to three USB devices at the same time. Power is supplied via a standard household mains
socket. The product is protected against short circuit, overvoltage and overload. This product is intended for
indoor use only. Do not use it outdoors. Contact with moisture (e.g. in a bathroom) must be avoided under
all circumstances.
For safety and approval purposes, do not rebuild and/or modify this product. Using the product for purposes
other than those described above may damage the product. In addition, improper use can cause hazards
such as a short circuit, fire or electric shock. Read the operating instructions carefully and store them in a
safe place. Only make this product available to third parties together with its operating instructions.
This product complies with statutory, national and European regulations. All company and product names
contained herein are trademarks of their respective owners. All rights reserved.
Package contents
• USB charger
• USB-C
TM
charging cable
(approx. 1 m in length)
• Operating instructions
Up-to-date operating instructions
To download the latest operating instructions, visit www.conrad.com/downloads
or scan
the QR code on this page. Follow the instructions on the website.
Explanation of symbols
The symbol with the lightning in a triangle indicates that there is a risk to your health, e.g. due to
an electric shock.
The symbol with an exclamation mark in a triangle is used to highlight important information in
these operating instructions. Always read this information carefully.
The product must only be installed and used in dry, indoor locations. The product must not
become damp or wet, otherwise there is a risk of a fatal electrical shock!
Safety instructions
Read the operating instructions carefully and observe in particular the safety instructions.
If you do not follow the safety information and information on proper handling in these
operating instructions, we will assume no liability for any resulting personal injury or
damage to property. Such cases will invalidate the warranty/guarantee.
a) General information
• This product is not a toy. Keep it out of the reach of children and pets.
• Do not leave packaging material lying around carelessly. It may become a dangerous toy
for children.
•
Protect the product from extreme temperatures, direct sunlight, strong jolts, high humidity,
moisture, flammable gases, vapours and solvents.
• Do not place the product under any mechanical stress.
• If it is no longer possible to operate the product safely, stop using it and prevent unauthorised
use. Safe operation can no longer be guaranteed if the product:
- is visibly damaged,
-
is no longer working properly,
-
has been stored for extended periods in poor ambient conditions or
- has been subjected to any serious transport-related stress.
•
Handle the product carefully. Jolts, impacts or a fall even from a low height may damage
the product.
• The mains socket that the device is plugged into must be easily accessible.
•
Unplug the connected USB device from the product when you are not using it.
•
Electrical devices must never be plugged in or unplugged with wet hands.
•
If the product shows signs of damage, do not touch it, there is a risk of death from an
electric shock! First, switch off the mains voltage to the mains socket to which the product is
connected (switch off the respective circuit breaker or remove the safety fuse; then switch off
the respective GFCI so that the mains socket is fully disconnected). You can then unplug the
mains plug from the mains socket. Dispose of the damaged product in an environmentally
friendly manner, stop using it. Replace it with an identical product.
•
The product must only be powered by a standard mains socket connected to the public grid.
Before plugging in the product, check that the voltage indicated on the product corresponds
to the voltage of your electricity supplier.
•
Never disconnect electrical equipment from the power outlet by the cable, always pull it out
of the mains socket by gripping surfaces provided for this purpose.
•
When setting up the product, make sure that the cables are not pinched, kinked or damaged
by sharp edges.
•
Always lay the cables so that nobody can trip over or become entangled in them. This poses
a risk of injury.
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method (e.g. photocopying, microfilming or capturing in
electronic data processing systems) requires prior written approval from the publisher. Reprinting, also in part, is
prohibited. This publication reflects the technical status at the time of printing.
Copyright 2020 by Conrad Electronic SE.
*2176725_v5_0920_02_dh_m_en
