b) Miscellaneous
• Consult an expert when in doubt about operation, safety or connection of the device.
•
Maintenance, modifications and repairs must only be completed by a technician or an au
-
thorised repair centre.
•
If you have questions which remain unanswered by these operating instructions, contact our
technical support service or other technical personnel.
Operation
The power adapter’s output voltage must match the input voltage of the electric con-
sumer.
1. Connect the output plug to the switched-off consumer. The inner contact is positive (+), the outer nega-
tive (–).
2. Connect the mains plug to a standard mains socket (100 – 240 V/AC, 50/60 Hz). The LED on the top of
the power adapter indicates operational readiness.
3.
Now switch the connected consumer on. If it does not function properly, switch it off immediately and
disconnect it from the power adapter.
4. Remove the power adapter from the mains when it is no longer in use.
Cleaning
• When cleaning, the power adapter must be disconnected from mains socket and electrical loads.
• Only use dry and soft cloth to clear the housing of the power adapter.
• Do not use abrasive or solvents.
Disposal
Electronic devices are recyclable waste and must not be disposed of in the household waste.
At the end of its service life, dispose of the product in accordance with applicable regulatory
guidelines.
You thus fulfill your statutory obligations and contribute to the protection of the environment.
Technical Data
Input voltage
................................................................100 - 240 V
Input AC frequency
......................................................50/60 Hz
Output voltage .............................................................12.0 V/DC
Output current ..............................................................0.6 A
Output power ...............................................................7.2 W
Average active frequency ............................................80.0 %
Efficiency at low load (10%)
........................................74.9 %
No load power consumption ........................................0.10 W
Plug-Ø .........................................................................5.5 mm (outer) / 2.1 mm (inner)
Cable length ................................................................1.8 m
Operating temperature ................................................0 to +25 ºC, 20 – 85 % RH
Storage temperature ....................................................-20 to +60 ºC, 10 – 90 % RH
Dimensions (W x H x D) ..............................................39 x 68 x 68 mm
Weight .........................................................................92 g
Model identifier:
FPPS 12-7W
Commercial registration number:
HRB 3896
Manufacturer:
Conrad Electronic SE, Klaus-Conrad-Str. 1,
D-92240 Hirschau
Operating Instructions
PLUG-IN POWER ADAPTER
Item No. 2258704 (FPPS 12-7W)
Intended use
This product is designed to supply electric devices with power. The connected load’s current consumption
must not exceed the maximum output rating of the product. Power is supplied via a standard mains socket
(100 – 240 V/AC, 50/60 Hz). The product should only be used in dry indoor areas. The product features both
short-circuit and overload protection.
This product fulfils European and national requirements related to electromagnetic compatibility
(EMC). CE conformity has been verified and the relevant statements and documents have been de
-
posited at the manufacturer.
For safety and approval purposes, you must not rebuild and/or modify this product. If you use the product
for purposes other than those described above, the product may be damaged. In addition, improper use
can result in short circuits, fires, electric shocks or other hazards. Read the instructions carefully and store
them in a safe place. Make this product available to third parties only together with its operating instructions.
This product complies with the statutory national and European requirements. All company names and prod-
uct names are trademarks of their respective owners. All rights reserved.
Delivery content
• Power adapter
• Operating instructions
Up-to-Date Operating Instructions
Download the latest operating instructions at www.conrad.com/downloads or scan the
QR code shown. Follow the instructions on the website.
Explanation of Symbols
The symbol with the lightning in the triangle is used if there is a risk to your health, e.g. due to an
electric shock.
The symbol with the exclamation mark in the triangle is used to indicate important information in
these operating instructions. Always read this information carefully.
The arrow symbol indicates special information and advice on operation.
This symbol indicates that the product meets the energy efficiency requirements for Class VI.
Safety instructions
Read the operating instructions carefully and especially observe the safety information.
If you do not follow the safety instructions and information on proper handling in this
manual, we assume no liability for any resulting personal injury or damage to property.
Such cases will invalidate the warranty/guarantee.
a) Persons / Product
• The device is not a toy. Keep it out of the reach of children and pets.
• Do not leave packaging material lying around carelessly. These may become dangerous
playing material for children.
• Protect the product from extreme temperatures, direct sunlight, strong jolts, high humidity,
moisture, flammable gases, vapours and solvents.
• Do not place the product under any mechanical stress.
•
If it is no longer possible to operate the product safely, take it out of operation and protect it
from any accidental use. Safe operation can no longer be guaranteed if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor ambient conditions or
- has been subjected to any serious transport-related stresses.
• Please handle the product carefully. Jolts, impacts or a fall even from a low height can dam-
age the product.
• Also observe the safety and operating instructions of any other devices which are connected
to the product.
•
Sufficient ventilation is essential when operating the product. Do not cover the product. Nev
-
er place the product on a table cloth or on a carpet. Place it on a hard, flame resistant base.
• The product should not be used immediately after it has been brought from an area of cold
temperature to an area of warm temperature. Condensed water might destroy the product.
Wait until the product adapts to the new ambient temperature before use.
• Make sure that the output of the power adapter is not short-circuited.
•
Never pour liquids over electrical appliances and never leave objects filled with liquids (e.g.
vases) on it or in the vicinity. There is a high risk of fire or life-threatening electric shock.
• Always lay the cables so that nobody can trip over or become entangled in them. This poses
a risk of injury.
• When setting up the product, make sure that the cable is not pinched, kinked or damaged
by sharp edges.
• The plug must be pulled out of the socket under the following conditions:
- before cleaning the product
- during a thunder storm
- if the product is not being used over a long period.
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com). All rights in-
cluding translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in electronic data
processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited. This publication
represent the technical status at the time of printing.
Copyright 2020 by Conrad Electronic SE.
*2258704_v1_0520_02_dh_m_en