Operating Elements
1
2
3 4
5
6
1 ON/OFF button / LED power indicator
2 Mobile device racking
3 1x USB type-C
TM
output (PD 18 W)
4 1x USB type-C
TM
output (PD 30 W)
5 5x USB type-A output (2.4 A)
6 21 V/DC power input
Operation
• Insert the adaptor power plug into the charging station power input
(6)
.
• Connect one end of the power adaptor cable to the power adaptor and the other end to a power outlet.
Check that the power adaptor LED is lit which indicates it is receiving power.
• Press the ON/OFF button to power ON the charging station.
The LED power indicator
(1)
will light up to indicate the charging station is receiving power.
• Connect the mobile device USB cables to the USB charging port to begin charging.
Care and Cleaning
• The product does not require any maintenance and should never be disassembled for any reason.
• Disconnect the product from the mains and allow to completely cool down before each cleaning.
• Do not use any aggressive cleaning agents, rubbing alcohol or other chemical solutions as they can cause
damage to the housing and malfunctioning.
• Clean the product with a dry, fibre-free cloth.
Disposal
Electronic devices are recyclable waste and must not be disposed of in the household waste.
At the end of its service life, dispose of the product in accordance with applicable regulatory
guidelines. You thus fulfill your statutory obligations and contribute to the protection of the
environment.
Technical Data
a) Charging station
Input voltage / current ........................... 21 V/DC 3 A
Charging outputs .................................. 7 (2x USB Type-C
TM
PD, 5x USB Type-A)
Output ................................................... USB Type-C
TM
PD 18 W: 5 – 12 V/DC 1.5 – 3 A, max. 18 W
USB Type-C
TM
PD 30 W: 5 – 20 V/DC 1.5 – 3 A, max. 30 W
USB Type-A: 5x 5 V/DC 2.4 A, max. 48 W
Combined output max. 63 W
Operating conditions ............................. 0 to 40 °C, 5 – 90 % relative humidity
Storage conditions ................................ -10 to +55 °C, 5 – 90 % relative humidity
Power cord ........................................... 1.2 m
Dimensions (L x W x H) ........................ 90 x 140 x 66.5 mm
Weight .................................................. 328 g (with accessories)
b) Power adaptor
Operating voltage ................................. 100 - 240 V/AC, 50/60 Hz
Output ................................................... 21 V/DC 3 A max. 63 W
Protection class .................................... II
Operating Instructions
USB Charging Station, SPS-DUO-PD
Item No. 1954695
Intended Use
This 7-port USB charging station is intended for
mobile devices such as mobile phones, smartphones
and tablet computers. It is powered by the included
adaptor and has overcurrent protection.
It is intended for indoor use only. Do not use it
outdoors. Contact with moisture, e.g. in bathrooms,
must be avoided under all circumstances.
For safety and approval purposes, you must not
rebuild and/or modify this product. If you use the
product for purposes other than those described
above, the product may be damaged. In addition,
improper use can result in short circuits, fires, electric
shocks or other hazards. Read the instructions
carefully and store them in a safe place. Make this
product available to third parties only together with
its operating instructions.
This product complies with the statutory national and
European requirements. All company names and
product names are trademarks of their respective
owners. All rights reserved.
Delivery Content
• Charging station
• Power adaptor
• Power cord (1.2 m)
• Operating instructions
Up-to-date Operating Instructions
Download the latest operating instructions at
www.conrad.com/downloads or scan the QR code
shown. Follow the instructions on the website.
Explanation of Symbols
The symbol with the lightning in the
triangle is used if there is a risk to your
health, e.g. due to an electric shock.
The symbol with the exclamation
mark in the triangle is used to indicate
important information in these
operating instructions. Always read this
information carefully.
The arrow symbol indicates special
information and advice on operation.
The product must only be installed and
used in dry, indoor locations. It must not
become damp or wet, as this may cause
a fatal electric shock!
Safety Instructions
Read the operating instructions carefully and
especially observe the safety information. If
you do not follow the safety instructions and
information on proper handling in this manual,
we assume no liability for any resulting personal
injury or damage to property. Such cases will
invalidate the warranty/guarantee.
a) General Information
• The product is not a toy. Keep it out of the reach of
children and pets.
• Do not leave packaging material lying around
carelessly. This may become dangerous playing
material for children.
• Protect the product from extreme temperatures,
direct sunlight, strong jolts, high humidity,
moisture, flammable gases, steam and solvents.
• Do not place the product under any mechanical
stress.
• If it is no longer possible to operate the product
safely, take it out of operation and protect it from
any accidental use. Safe operation can no longer
be guaranteed if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor
ambient conditions or
- has been subjected to any serious
transport-related stresses.
• Please handle the product carefully. Jolts, impacts
or a fall even from a low height can damage the
product.
• Also observe the safety and operating instructions
of any other products which are connected to the
product.
• Consult an expert when in doubt about the
operation, safety or connection of the product.
• Maintenance, modifications and repairs must only
be completed by a technician or an authorised
repair centre.
• If you have questions which remain unanswered by
these operating instructions, contact our technical
support service or other technical personnel.
• In schools, educational centres, hobby and
self-help workshops, the operation of the product
is to be supervised by trained employees.
b) Power Adaptor / Cable
• As power supply, only use the supplied mains
adaptor.
• Only connect the power adaptor to a normal mains
socket connected to the public supply. Before
plugging in the power adaptor, check whether the
voltage stated on the power adaptor complies with
the voltage of your electricity supplier.
• Never connect or disconnect power adapto
rs if
your hands are wet.
• Never unplug the power adaptor from the mains
socket by pulling on the cable; always use the
grips on the plug.
• When setting up the product, make sure that
cables are not pinched, kinked or damaged by
sharp edges.
• Always lay the cables so that nobody can trip over
or become entangled in them. This poses a risk
of injury.
• Disconnect the product from the mains voltage
during thunderstorms to protect the product and
connected devices from any damage.
c) Installation Site
• Select a stable, flat, clean, sufficiently large place
for the USB charging station.
• Do not place the USB charging station on a
flammable surface (e.g. carpet, tablecloth). Always
use a suitable, non-flammable, heatproof base.
• Do not place the USB charging station on surface
of valuable furniture without suitable protection.
The impact of heat could lead to colour or material
changes. Scratches or pressure points may occur
on the furniture surface.
• Keep the device away from easily flammable
materials (e.g. drapes, paper), liquids (e.g.
gasoline) or gases. There is a risk of fire and
explosion!
• Do not use in the immediate vicinity of strong
magnetic or electromagnetic fields, transmitter
aerials or RF generators. This can impact the
electric control system.
d) Charging station
• Never pour any liquids over electrical devices or
put objects filled with liquid right next to the device.
If liquid or an object enters the interior of the device
nevertheless, first power down the respective
socket (e.g. switch off circuit breaker) and then
pull the mains plug from the mains socket. Do not
operate the product anymore afterwards, but take
it to a specialist workshop.
• Never use the product immediately after it has
been brought from a cold room into a warm
one. The condensation generated could destroy
the product. The plug-in power supply unit also
involves danger to life by electric shock!
• Allow the product to reach room temperature
before connecting it to the power supply and
putting it to use. This may take several hours.
• The housing of the USB charging station and
the power adaptor heat up during operation
(depending on the output current). Make sure that
there is sufficient ventilation; never cover the USB
charging station and the power adaptor during
operation.
• For safety reasons, it is recommended not to
leave mobile phones, smartphones and tablets
unattended when charging.
• Disconnect the product from the mains voltage
when you no longer need it (e.g., when it is put
for storage). Disconnect the mains plug from the
mains socket.
• Do not apply force when connecting the USB
Type-A plugs. A USB type-A plug only fits in one
direction into the USB socket.
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com). All rights
including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in electronic data
processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited. This publication
represents the technical status at the time of printing.
Copyright 2019 by Conrad Electronic SE.
*1954695_v2_0519_02_dh_m_en
