21
Table 3. TEST MODE Current
User-selected Charging
current
200 mA
500 mA
700 mA
1000 mA
Thereafter Discharging
current
100 mA
250 mA
350 mA
500 mA
z
The maximum charging current is 1000 mA and not affected by the number of
rechargeable batteries inserted.
z
After the test mode is finished, the display will shift between the “Full” sign and the battery
capacity (in mAh or Ah) automatically in 3-second intervals until the rechargeable batteries
are removed. User can switch to other displays by pressing the DISPLAY key.
TRICKLE CHARGING
After the rechargeable battery is fully charged in any of the operating modes, the charger will
give a small amount of current to the rechargeable batteries to maintain the fully charged level.
This mode is automatically launched after rechargeable batteries are fully charged and kept at
the charging unit. The signal “Full” will be displayed on the LCD.
DISPLAY MODE INFORMATION
User can use different display modes to monitor the rechargeable battery condition during the
different operations (see below figure and Table 4 to 7).
Battery capacity displayed in
(mAh) as the checking is
finished in Test mode.
Different operating modes
Different display modes are
exhibited: Charging current, Time,
Voltage and Capacity
Summary of Contents for IPC-1
Page 47: ......
