3.Junior User Guidebook
7
Control Area
1
2
3
8
7
5
4
6
Figure 3-3 Control Area Overview
1.
Function button area
: Total 11 buttons
2.
Waveform generator controls (optional)
or
DAQ:
This function is not available.
P/F:
Pass/Fail (see "
W.REC:
Waveform Record (see "
How to Record/Playback Waveforms
3.
Trigger control area
with 2 buttons and 1 knob.
The Trigger Level knob is to adjust trigger voltage. Other 2 buttons refer to trigger
system setting.
4.
Horizontal control area
with 1 button and 2 knobs.
"HOR" button refer to horizontal system setting menu, "Horizontal Position" knob
control trigger position, "Horizontal Scale" control time base.
5.
Vertical control area
with 5 buttons and 2 knobs.
CH1 - CH4 buttons correspond to setting menu in CH1 - CH4. "Math" button
provides access to math waveform functions (+, -, ×, /, FFT, user function, digital
filter). The "Vertical Position" knob control the vertical position of current channel,
and the "Scale" knob control voltage scale of current channel.
6.
Default
: Call out the factory settings.
: Print an image of what appears on the instrument screen.
Decode
: Turn on/off
Decode function.
Snap:
Shortcut button for measurement snapshot.
7.
Direction key:
Move the cursor of the focused parameter.
8.
M
knob (Multipurpose knob): when a
symbol appears on the menu, it indicates
you can turn the
M
knob to select the menu or set the value. You can push it to close
