46
As soon as the temperature is once again within the admissible limits, the current
program is continued.
If the limit value for the temperature on the cooling body is exceeded during pro-
cessing, the respective program is interrupted and OVT is displayed for OVERTEMP.
OVT C= 17.4mAh
00:01 D= 0.0mAh
43° C U= 12.109V
00:01 I= 0.000A
As soon as the temperature on the cooling body is once again below this limit value,
the current program is continued.
This charging station is provided with a memory backup. This means that the pro-
gramme and the cumulated capacity values of the accumulator are saved in the case
of power failure. Therefore, never replace the accumulator if the device is turned off,
because otherwise the charging station would then take over the data which are not
valid any more and would determine false values for the new accumulator!
If the charging station is turned off during the setting of the charging or discharging
parameters, the setting process will start anew.
Take note that the time between connecting and disconnecting should be at least 20
seconds.
CAUTION!
False settings can damage the accumulator and the charging station: the
accumulator is either charged incompletely or overcharged. Any warranty
will lapse in such cases!
Maintenance and Cleaning
The device is maintenance-free apart from an occasional cleaning of the lead accu-
mulator charging station.
Use a clean, lint-free, antistatic and dry cloth to clean the device. Do not use any
abrasive or chemical agents or detergents containing solvents.
Summary of Contents for CT-1500Pb
Page 95: ...95...
