93
3.
Restarting the measurement with the same period
Proceed as follows to start another measurement with the
previously set period:
Briefly press the
button; the display shows PERIOD
and the current period setting for the measurement.
Briefly press the button: the day flashes on the dis
-
play.
Briefly press the button: the hours flash on the dis
-
play.
Briefly press the
button: the setup mode is exited
and the display does not flash.
Briefly press the
button to start the measurement.
4.
Early aborting the measurement
Briefly press the
button for the display to show the
current time setting.
Press and hold the button for 3 seconds until the
normal display is shown.
When the flashing PERIOD disappears, the measure
-
ment has been aborted.
