VOLTCRAFT 23 57 10, Operating Instructions Manual

Page: 62 / 136

62
16. Warning messages
REVERSED REVERSED REVERSED REVERSED REVERSED
POLARITY
POLARITY POLARITY POLARITY POLARITY
CONNECTION CONNECTION CONNECTION CONNECTION CONNECTION
BREAK
BREAK BREAK BREAK BREAK
BATTERY CHECK BATTERY CHECK BATTERY CHECK BATTERY CHECK BATTERY CHECK
OVER VOLTAGE
OVER VOLTAGE OVER VOLTAGE OVER VOLTAGE OVER VOLTAGE
BATTERY CHECK BATTERY CHECK BATTERY CHECK BATTERY CHECK BATTERY CHECK
LOW VOLTAGE
LOW VOLTAGE LOW VOLTAGE LOW VOLTAGE LOW VOLTAGE
BREAKDOWN BREAKDOWN BREAKDOWN BREAKDOWN BREAKDOWN
VOL SELECT VOL SELECT VOL SELECT VOL SELECT VOL SELECT
ERR
ERR ERR ERR ERR
IN VOLTAGE IN VOLTAGE IN VOLTAGE IN VOLTAGE IN VOLTAGE
ERR
ERR ERR ERR ERR
SHORT ERR SHORT ERR SHORT ERR SHORT ERR SHORT ERR
BATTERY VOL BATTERY VOL BATTERY VOL BATTERY VOL BATTERY VOL
ERR
ERR ERR ERR ERR
The polarity of the battery poles has been switched.
The connection to the battery has been broken,
e.g. if the battery has been disconnected during
the charging process.
A short-circuit has been established on the charger
output.
The input voltage (operating voltage) for the
charger is too low.
The voltage of a LiPo battery to be charged is
incorrectly configured.
The charger has established that there is an internal
problem. Should this message permanently be
displayed, it is possible that the charger is defective;
have it checked by a specialist workshop or
qualified technician.
During the charging process it has been established
that the battery has been totally discharged.
In this case you should check if the voltage of the
battery has been correctly set for the charging
process.
The voltage in one of the cells of a LiPo battery is
too high. This can occur if a multicell LiPo battery
has been charged previously without a balancer.