VOLTCRAFT 1590606 Operating Instructions Manual Download Page 8

8

6. Battery information

There are numerous hazards associated with the use of rechargeable batteries. Compared with 

conventional NiCd or NiMH rechargeable batteries, LiPo rechargeable batteries have a high energy 

content. For this reason, it is essential to comply with safety regulations to prevent the risk of a 

fire or explosion.

Always observe the following safety information when handling rechargeable batteries.
In addition, ensure that you observe any additional safety information provided by the battery 

manufacturer.

a)  General information

• 

Rechargeable batteries are not toys. Keep batteries out of the reach of children. 

• 

Do not leave batteries lying around, as they constitute a choking hazard for children and pets. Seek im-

mediate medical advice if a battery is swallowed.

•  Rechargeable batteries must never be short-circuited, dismantled or thrown into fire. This may cause a 

fire or explosion!

• 

When handling leaking or damaged batteries, always use suitable protective gloves to avoid burning 

your skin. 

•  Never attempt to recharge non-rechargeable batteries, as this may cause a fire or explosion. 

Non-rechargeable batteries are designed to be used once and must be disposed of properly when they 

are empty.
Only recharge compatible rechargeable batteries (see “Technical data”).

• 

Batteries must not become damp or wet.

• 

Never use battery packs that are made of different types of cells. 

• 

Disconnect the battery from your model before connecting it to the charger. Never leave the battery con-

nected to a cruise control or autopilot system when it is charging. This may damage the charger, cruise 

control/autopilot system or the battery.

• 

Never charge/discharge a battery when it is inside a model. Always remove the battery from your model 

before connecting it to the charger.

•  Place the charger and rechargeable battery on a non-flammable, heat-resistant surface (e.g. stone tiles). 

Keep the charger and battery away from flammable objects. Maintain a sufficient distance between the 

charger and the battery. Never place the battery on top of the charger.

•  The charger and battery may heat up during the charging process. Always ensure that there is sufficient 

ventilation. Never cover the charger or the battery! Never interfere with the built-in fan.

• 

Never charge/discharge a battery when the charger is unattended.

• 

Always ensure that the battery is connected in the correct polarity (observe the plus/+ and minus/- sym-

bols). Connecting the battery in the wrong polarity may damage the charger and/or battery and cause 

a fire or explosion!

The charger features a safety mechanism to prevent the battery from being connected in the wrong po-

larity. However, connecting the battery in the wrong polarity may still cause damage in certain scenarios.

Summary of Contents for 1590606

















Reviews: