Filing Cutter Depth Gauges 20
If storing saw for more than 30 days, follow the steps below.
1. Remove battery from chain saw.
2. Charge battery completely. (Note: It could take up to 7 hours to completely charge the battery.)
3. When the battery is completely charged, remove it from the charger and put a protective cap on battery
terminals.
4. Remove and clean guide bar and chain. Clean guide bar and chain by soaking in petroleum-based solvent
or mild soap and water mixture.
5. Dry guide bar and chain.
6. Place the chain in a container filled with oil. This will prevent rust.
7. Wipe a thin coating of oil over the surface of the guide bar.
8. Wipe off outside of saw body. Do this with a soft cloth dampened with a mild soap and water mixture.
9. Store chain saw and battery
● in a high or locked place, out of children’s reach
● in a dry place
● in a carrying case or with scabbard over guide bar
This product uses nickel-cadmium batteries. Local, state, or federal laws may prohibit the disposal of
nickel-cadmium batteries in the ordinary trash. To help protect the environment and conserve natural resources,
please dispose of batteries properly. You may contact your local recycling center for information on where to
drop off the batteries.
IMPORTANT: To prolong battery life, avoid leaving the battery on the charger for extended periods of
time (over 30 days without use).
Barrery disposal and recycling
Storge
