background image

6

7

•  

 

  ensure they are completely dry before 

  

  reusing. Avoid direct sunlight or   

  extreme drying conditions. Do not  

  use a hair dryer to dry the filters.
 

•  

  

  aligning it with the dust container   

  and sitting it in place, then fit the  

  filter in the frame by aligning the frame 

 

  with the dust container and simply  

  sliding it into place.
 

•  

 

  will allow the dust container to fit   

  back into the dust container only if  

  the filter is properly installed. If the dust

 

  container does not fit into the dust 

  

  compartment do not force it.

  

  Check the filter is properly installed.
•  

 

  do not reuse them. 

CHANGING THE EXHAUST FILTER

•  Open the grill on the rear cover.
•  Take the filter out and replace it with  

  a new one.
•  Put the filter on the grill.
• 

How To Store

Your Vacuum

1.  Choose a storage location that is  

  both safe and dry.
2.  Depending on the space available, 

  you can choose to store it in an   

  upright or horizontal position using 

      the parking slot. 
3.  Be careful not to trap, twist or tie the  

  electrical cord. Wind it.
4.  Keep the extension tubes, nozzles 

  and hose together to avoid 

  misplacing them.

Disposing Your

Vacuum

PACKAGING MATERIAL

The packaging materials are  

environmentally-friendly and can be 

recycled. The plastic components are 

identified by markings, e.g. >PE<, 

>PS<. Please dispose of the packaging 

materials in the appropriate container at 

a community waste disposal facility. 

OLD APPLIANCE

The symbol   on the appliance or its 

packaging indicates that this product 

may not be treated as household waste. 

Instead, it should be handed over to 

the applicable collection point for the 

recycling of electrical and electronic 

equipment.

By ensuring that this product is disposed 

of correctly, you can help prevent 

potential negative consequences for 

the environment and human health. 

For more detailed information about 

recycling, please contact your local 

city council.

 

 

 

•    To close the dust container, ensure   

      the hinge is securely fastened before     

      you lock the cover.

•   Replace the dust container into  

  the cleaner.
•   Always operate the appliance with the  

 

     dust container properly installed.

 

REPLACING AND CLEANING  

THE HEPA FILTER

•   Filter for air-inlet should be cleaned  

  at least twice a year or when it   

  becomes visiblly solid.
•   Always operate the cleaner with       

 

  filters to avoid reduced suction 

  or a motor damage.

 

 

 •   Remove the dust container as    

  described in the previous section.
•  

  

  in this vacuum cleaner, a spongy   

  grey protection filter, and the    

  framed HEPA filter .

•  

  

  surface covered with a sheet  

  of paper. This will dislodge  

  excessive residue from the filter.  

     Dispose of the cover sheet with the  

  dust residue. Gently beat the grey  

     protection filter in an open air space  

  to properly dislodge any dust.

•  

 

  grey protection filter can be washed  

  under a tap with cold water. Always  

  wash the filter from the underside, do  

  not scrub of use cleaning agents on  

  the filter. Do not use a washing   

  machine to wash the filter.

•  

  

  container by pulling on the release  

  tab on the top right side of the filter  

  frame. Remove the grey protection  

  filter by simply pulling it loose from  

  the container.

MAINTENANCE

MAINTENANCE

Reviews: