VOLTA Contour Gen 3 U4210 Instruction Manual Download Page 6

1.   After removing the hose, open 
 

the front cover.

2.   Raise the support of the bag to an 
 

upright position.

 

            
3.  Remove the dust bag.
4.  In case of paper bag.
 

Replace the paper bag with new when it is  

 

full of dust or dust bag indicator shows red.

 

In case of cloth bag
Follow the above 1,2,3 steps
To open, slide the plastic clip off the bag
Empty bag and refit the plastic clip

Note: The cloth bag may be washed in lukewarm  
water and dried completely. It should not be washed  
in washing machine.

 

5.  Close the cover by pressing down until it  
 

is locked

6.  *Note:  A cloth bag is not supplied with this  
 

product.  To purchase a cloth bag, please return  

 

to the place of purchase or contact Electrolux  

 

on 1300 365 305 (Aus), 0508 730 730 (NZ).

WARNING:

 

On collection of proprietary carpet conditioning 

powders, plaster / concrete dust, it is 

recommended that the dust bag is changed. 

Some of the preparations contain substances 

which while left in the vacuum cleaner for 

extended periods could create damage.  

Many air fresheners, household deodorants, 

sprays and polishes contain highly inflammable 

gas propellants. Because of this it is particularly 

important that these products are used strictly 

in accordance with the relevant manufacturers 

instructions. It is essential that none of the above 

products are sprayed directly into the vacuum 

cleaner or any of the filters, hose assembly or 

dust chamber

Cleaning filter

• 

Filter should be cleaned at least twice a year  

 

or when it becomes visibly dirty.

• 

Always operate the cleaner with filter installed,  

 

otherwise reduced suction or motor damage  

 

may result.

• 

Disconnect from electrical outlet, before  

 

cleaning the filter.

• 

Do not use a washing machine to rinse filter.

• 

Do not use hair dryer to dry it.

 
 

1.   Pull dust bag by pulling dust bag collar  
 

upwards.

2.   Remove filter from holder.
3.   Rinse filter in lukewarm water and dry the  
 

filter completely.

4.   Put back filter into the filter holder and refit.
 

 

 

 

Changing the Micro-exhaust filter

1.   Open the Air-Outlet Filter Grille by pressing the  
 

grill latch and pull out.

2.   Take the filter out and replace with a clean filter.
3.   Close the Air-Outlet Filter Grille.
4.  To purchase new filters, contact Electrolux  
 

on 1300 365 305 (Aus), 0508 730 730 (NZ).

MAINTENANCE

5.

35121_U4210-U4214_IFU_V3.indd   6

2/10/08   2:13:16 PM

Summary of Contents for Contour Gen 3 U4210









Reviews: