[email protected] • 813.978.3700
Unscrew the set screws from the
top of the luminaire. Remove the
faceplate and gasket from housing.
Remove Luminaire Cover and Gasket
4
Set Screws
Faceplate
Housing
Gasket
Remove the screw cap at the center
of the optic. Unscrew the screw,
then remove the optic from the
luminaire.
Put the new optic in the luminaire.
Reverse Step 6 then Step 4 to
reinstall all removed parts.
Replacing the Optic
6
Screw Cap
Optic
LED
Housing
Screw
Adjusting Light Position
5
Loosen the set screw. Use a
screwdriver to loosen and to tighten
the adjustment screw until desired
position is achieved. Tighten the set
screw to lock the position.
Reverse step 4 to reinstall removed
parts.
Set Screw
Adjustment Screw
Adjusting Light Position and Changing Optics
