background image

VOLT

®

 Forged Brass Underwater Light 

VUL-680 Series

Important: Please Read Before Installation

INSTALLATION INSTRUCTIONS

This luminaire is intended for installation in accordance with local codes and the 

National Electric Code (NEC). Failure to adhere to these codes and instructions may 

result in serious injury, property damage and void the warranty.

These instructions do not intend to cover all variations in installation, operation 

maintenance or mounting situation. 

1.  Make sure that the power is turned OFF before installing or servicing this 

luminaire. 

2.  Use only in ponds and small decorative fountains where person will immerse no 

more than their hands and lower arms while the product is energized.

3.  DO NOT use in water intended for swimming, wading, immersion or bathing.
4.  All installer completed cable connections must be located outside of pond or 

fountain.

5.  Low voltage circuit must be supplied by a power unit marked as suitable for 

supplying submersible luminaires.

6.  Power unit must be supplied by a circuit protected by a ground fault circuit 

interrupter (GFCI).

7.  Maximum depth 18”
8.  This luminaire is intended to be used only with a power supply (transformer) rated 

maximum of 300 watts (25 AMPS) at 15 volts.

9.  Wiring connections must be made with wire connectors that is suitable for outdoor 

use.

10.  Position the low voltage wire and wire connector so that it is located within 6 

inches (15.2 cm) from a building structure, a luminaire or fitting.

11.  The main low voltage cable is intended for shallow burial - less than 6 inches (152 

mm)

12.  If additional lengths of low voltage cable is required, please contact www.

voltlighting.com or call 1-813-978-3700.

!

w w w . v o l t l i g h t i n g . c o m

Summary of Contents for VUL-680 Series









Reviews: