INSTALLATION INSTRUCTIONS
w w w . v o l t l i g h t i n g . c o m
- 4 -
Install Fixture Body
Install Color Strip
2
3
VOLT
®
Solar Integrated LED Brass Dock Light (Bronze)
VSDL-6013-BBZ
1. Place the fixture onto the
desired location and mark
four points on the surface
for the wall anchors.
2. Remove the fixture body.
Using the marks on the wall
as a guide, drill the proper
holes required to mount the
fixture.
3. Push the wall anchors into
the drilled holes.
4. Attach the fixture onto
the wall anchors using the
screws. Tighten the screws
with a screwdriver.
MOUNTING SURF
ACE
Screw
Wall Anchor
Hole
Fixture
Note: You can pick a color strip of your choice, if you perfer to have a
colored light output.
1. Remove the film on the end of the color strip.
2. Pass the color strip through the ribs around the luminaire.
3. Position the ends of the color strip behind one of the ribs to secure
in place.
Color Strip
Color Strip
Color Strip
Color Strips:
Film
Rib
Amber
Red
Blue
