w w w . v o l t l i g h t i n g . c o m
[email protected] • 813.978.3700
Install Shield and Glare Guard
4
Set Screw
Shield
Fixture Body
Glare Guard
Place the shield over the bulb and
thread onto the fixture. Attach the
glare guard back onto the shield and
secure with the set screw.
INSTALLATION INSTRUCTIONS
- 5 -
- 4 -
Install Fixture Body to Stem
1
Pass the supply wire from the
fixture body through the stem.
Thread the fixture body onto
the stem. Then tighten the set
screw to lock the fixture body
into place.
Set Screw
Fixture Body
Supply Wire
Stem
Remove Shield and Glare Guard
2
Loosen the set screw and remove
the glare guard from the shield.
Remove the shield from the
fixture body.
Set Screw
Shield
Fixture Body
Glare Guard
Install Bulb
3
Insert the bulb with the correct
wattage and type marked on the
fixture label.
CAUTION: Do not exceed maximum
wattage marked on luminaire label.
NOTE: DO NOT touch bulb with bare
hands. Use soft cloth to handle
bulb.
Socket
MR11 Bulb
Install Stake
5
Determine the desired location for
mounting the fixture. Hammer the stake
into the ground until flange of stake is
flush to grade. To avoid damage to the
stake, place a board on top of the stake
while hammering.
NOTE: If the ground is hard and the
stake is difficult to install, make a
crosscut in the ground using a flat
shovel.
Board
Stake
Soil
Ground
All-Star
TM
Mini Innovator Path & Area Light
VPL-3025 Series
