INSTALLATION INSTRUCTIONS
w w w . v o l t l i g h t i n g . c o m
VOLT
®
Low Voltage Path Light
VPL-1049-4-BBZ
- 6 -
6
7
Install/Replace Bulb
Wire Connections
Strip two leads from fixture wires. Using two UL listed wire
connectors (sold separately), connect leads from fixture wires to
main supply cable leads.
Main Supply Cable
Fixture Wires
Wire Connectors
Adjust Shade Direction
Loosen the knuckle to adjust
the shade to your desired
angle. Once your desired angle
is achieved, hand tighten the
lock screw to secure the shade
direction.
Shade
Lock Screw
ROTATE
Please reverse Step 1 - Step 3 to expose the bulb and replace it
with the correct wattage and type marked on the fixture label.
IMPORTANT: The Bulb must be protected from moisture and dust at
all times. Always reinstall the lens when removed.
Summary of Contents for VPL-1049-4-BBZ
Page 7: ...7...