INSTALLATION INSTRUCTIONS
w w w . v o l t l i g h t i n g . c o m
- 6 -
Wire Connections
6
Adjust Shade Direction
7
G2 Arch Brass Path & Area Light
VPL-1048-4-BBZ
Strip both leads from the fixture wires. Using two UL listed wire
connectors (sold separately), connect the leads from the fixture wires to
the main supply cable leads.
Main Supply Cable
Fixture Wires
Wire Connectors
There are two methods to adjust the shade direction.
NOTE: Do not rotate the shade a full 360
0
. This will damage the internal
wiring.
A. Loosen the knuckle on the stem to adjust the shade to your desired
angle. Once your desired angle is achieved, hand tighten the knuckle
to secure the shade direction.
B. Using the Allen wrench, loosen the set screw on the stem and adjust
the shade to your desired angle. Once your desired angle is achieved,
tighten the set screw using the Allen wrench to secure the shade
direction.
Shade
Shade
Knuckle
Allen Wrench
Set Screw
ROTATE
OPTION A
OPTION B
ROTATE
