w w w . v o l t l i g h t i n g . c o m
INSTALLATION INSTRUCTIONS
- 4 -
2
VOLT
®
G2 Big Par36 Cast Brass Flood Light
VFL-4501-4-BBZ
3
Install PAR36 Bulb
Fixture
Supply Wire
PAR36 Bulb
Screw
Use a PAR36 bulb (sold separately),
with the correct wattage and type
as marked on luminaire label.
Connect the supply wires using the
screws on the bottom of the PAR36
bulb, tighten with a screwdriver.
CAUTION: Do not exceed maximum
wattage marked on luminaire
label.
NOTE: DO NOT touch lamp with
bare hands. Use soft cloth to
handle lamp.
Install Bulb Holder and Glare Guard
Glare Guard
Tuck the excess wires inside
of the fixture and place the
PAR36 bulb inside. Place the
bulb holder onto the top of
the PAR36 bulb and thread
the glare guard onto the
fixture.
Fixture
Bulb Holder
PAR36 Bulb
