INSTALLATION INSTRUCTIONS
w w w . v o l t l i g h t i n g . c o m
- 4 -
Remove Glare Guard and Lens
1
Bulb Installation
Install MR11 Bulb
2
VOLT
®
Tri-Hub Ultra-Slim Brass Downlight
VAL-2102-0-BBZ
Loosen the set screw to remove
the glare guard from lens.
Then unthread the lens and
remove it from the fixture body.
Fixture Body
Lens
Set Screw
Glare Guard
Insert the MR11 bulb with the
correct wattage and type marked
on the fixture label and secure
into place.
CAUTION: Do not exceed
maximum wattage marked on
luminaire label.
MR11 Bulb
Socket
Bulb Installation
3
Install Lens and Glare Guard
Fixture Body
Lens
Set Screw
Glare Guard
Thread the lens back onto the
fixture body and hand tighten
until snug.
Place the glare guard back onto
the lens and secure by using the
previously removed set screw.
