INSTALLATION INSTRUCTIONS
w w w . v o l t l i g h t i n g . c o m
- 4 -
1
2
VOLT
®
Brass Lanai Light
VAL-2012-BBK
Remove Lens from Fixture
Remove the lens from the
fixture body by rotating the
lens counter-clockwise.
Lens
Fixture Body
Install Fixture Body
Place the fixture wires through
the cut out of the backplate.
Attach the backplate onto the
desired location and mark the
three points on the wall surface.
Drill a hole using the marks and
insert the wall anchor.
Place the backplate onto
the wall surface and secure
by threading screws into
wall anchors. Tighten with a
screwdriver.
NOTE: This fixture can be
oriented upwards or downwards.
Fixture Body
Wall Anchor
Backplate
W
ALL
Screw
Mark
Cut out
Fixture Wires