INSTALLATION INSTRUCTIONS
w w w . v o l t l i g h t i n g . c o m
- 6 -
Option 2: Surface Mount
Wire Connection
1
Integrated Hub Top
Main Supply Wires
Fixture Wires
Connectors
Surface Mount
Main Supply Wire
Main Supply Wire
Continuation
Insert the main supply wire continuation (if needed) and the main
supply wire up through the bottom of the surface mount and strip the
ends of both sets of supply wires.
Attach the fixture wires and both sets of the main supply wires to their
correct connectors in the integrated hub top.
Once the wires are installed properly, thread the integrated hub top
back onto the surface mount and hand tighten until snug.
Install Surface Mount
2
Screw
Optional Anchor
Surface Mount
Washer
Place the surface mount onto
the desired location and secure
it with the screws. Tighten with
a screwdriver. Nylon spacers are
required when installing on trees.
VOLT
®
Top Dog with Integrated Hub Top
VAL-2100-0-BBZ (includes part# VAL-180-X-BXX & VAC-ZWM7-BBZ)
