INSTALLATION INSTRUCTIONS
w w w . v o l t l i g h t i n g . c o m
- 4 -
Connect Wires
4
Remove Top
3
VOLT
®
Pro Connection Hub
VAC-HUB5
Remove the top from the
hub.
Top
Hub
Put the supply cables from the transformer and the fixtures through the
openings on the bottom of the hub. Each opening can accept five cables.
Strip each end of supply cable pigtail. Open the lever on the terminal
block connector. Insert one side of the pigtail into the connector on the
terminal block and push the lever down to secure the connection. Insert
the other side of the pigtail into the opposite connector and push the
lever down to secure the connection.
Use the same method to connect the rest of the supply cables.
Supply Cables
from Fixtures
Supply Cable
from Transformer
Open
Lever
Connectors
Terminal Block
Pigtail
Hub
Hub Opening
