[email protected] (58) 341-05-06 | [email protected] (58) 341-38-80 | [email protected] (22) 100-42-99
Open window detect function (OWD function)
When the Open Window mode is enabled in the parameter setting, the system will automatically stop heating
when it detects a sudden drop of room temperature (2
°C in
15 minutes as default). This is normally caused
when a window or door is opened without turning off the heating device.
The device will return to the previous mode of operation after 30mins, then
OP
disappear. Press any button
will exit OWD function during the heating off period.
Pair with Host device
Note: Before adding thermostatic radiator valve HT-10R
to the app, please make sure you have add the
gateway E-hub.
1)
Turn on app, press gateway-- press add sub device
—
press heater
2)
Turn radiator HT-10R off by pressing ON/OFF button, then long press
M
button until it show a
“
0 and
signal icon
”
, then press
UP
button, when HT-10R display
3
or
signal icon stop moving
, means code
pairing done. Press ON/OFF button to return, and press again to turn it on.
Parameter setting
Turn off the thermostat, Press and hold
M
and
UP
button for 3s, until it shows the item 01, each press of
M
button will go to next item setting, adjust the range by using
UP
and
DOWN
button.
Menu
Description
Range
Default Value
01
Temp. calibration for internal sensor
-8
℃
~8
℃
0
℃
02
Set Point Max.
5
℃
~35
℃
35
℃
03
Set Point Min.
5
℃
~35
℃
5
℃
05
Frost Protection Temp.
5
℃
~15
℃
5
℃
10
Display
0: Room temp.
1: SET temp.
0
12
Open window detect function
1: ON 0: OFF
0
13
OWD Detect Time
2~30mins
15mins
14
OWD Drop temp. select
（
within detect time
）
2.3.4
’
C
2
‘
C
15
OWD Delay time select
(Return to previous working status)
10~60min
30mins
17
Factory reset
0: No
0
1: Yes, and then press
On/off button for 5s,wait
until thermostat restart
18
Software version
19
Software version
31
Battery voltage
Unit: 10mv
32
PID P-band select
2
℃
~10
℃
7
℃
33
PID I-time select
30~90min
30min
