![background image](http://html.mh-extra.com/html/volt/51100/51100_user-manual_1046247007.webp)
Warning
This heater is not equipped with a device to control the room temperature. Do not use this
heater in small rooms when they are occupied by persons not capable of leaving the room on
their own, unless constant supervision is provided.
Preparation
1. Unpack the carton. Take out the accessories pack from the carton of the heater body.
Make sure the accessories listed in the above Accessories Check List are included. If
anything missing, ask the retailer immediately to provide it to you.
2. Prepare a cross head screw driver.
3. Read this instruction manual carefully before installation and use. Keep this instruction
manual in a proper and safe place for future use in case needed.
Installation:
1. Unpack and take out both upper body and lower body together.
2. Put Lower Body up-side-down (Fig. A). Fix Base cover (#3) onto Lower Control Box.
Then slide Base Cover (#3) , Base (#7) and Washer (#6) onto Base Bracket (#8)
respectively, and fix it well with Screw M6*20 (#5)
3. Lay Lower Body vertically (Fig. B). Put Upper Body on top of Lower Body. Get the plug
(#2) and power supply cord (#10) through the holes on the center of Base Cover (#3)
and Base (#7). Clip the power supply cord (#10) with Cord Clip (#11) and fix it onto Base
(#7) with Screw (#1) (Fig C).
4. Fix Upper Body and Lower Body with Joint Boards and Screw M6*27 (Fig.D).
Operations:
1. Plug in the unit to a socket. Make sure the power supply is same as rated.
2. Turn Switch to position “I” to switch on one heating element. Turn Switch to position “II”
to switch on both heating element. Turn Switch to position “O” to switch off the unit.
Cleaning:
Unplug the unit before cleaning. It should be wiped with wet cloth. Do not use too much
water.
6
51100 Handleiding.indd 6
51100 Handleiding.indd 6
25-11-2021 15:04
25-11-2021 15:04